high level link pipe- keeping footpegs?!
 

i'm trying to find a high level link pipe for my K4, to fit my CCC can.
BUT i want to keep the pillion pegs as i have alot of spontanious passengers!
any suggestions or reccomendations?

Re: high level link pipe- keeping footpegs?!
 

In thery any link hi level link pipe could be turned in enough to be inside the foot pegs, just make sure it clears the swing arm

My link pipe clear the swingarm and i've still got my p'pegs on but that full micron pipe work

http://i13.photobucket.com/albums/a3...Picture012.jpg

Re: high level link pipe- keeping footpegs?!
 

I simply made my own spacers. Some tubular alloy cut to approx 1.5cm and some longer bolts. If you don't have any alloy or can't get it cut as a stop gap I used longer bolts and a couple of over sized nuts to act as spacers. Total cost under a pound.

They have been tested by a number of pillions without any issue.

Re: high level link pipe- keeping footpegs?!
 

I forgot about the spacers :roll: i used paddock bobbins i didn't need