Bike mods - thanks to Amuli and Simple Simon.
 

Still a WIP, but thanks to Amuli for his old Hamicad and Simple Simon for the Seat Cowl, Hugger and Screen, my bike is now like this.....

Hugger (and a little bit of the Tailtidy)

http://www.chaoscrypt.com/sv/26-04-07_1732.jpg

The new dark screen
http://www.chaoscrypt.com/sv/26-04-07_1733.jpg

Tailtidy and prepped side panel for respray.

http://www.chaoscrypt.com/sv/26-04-07_1743.jpg

Tail without grab rail with the prepped fillers from the seat cowl kit, rear filler panel prepped for respray

http://www.chaoscrypt.com/sv/26-04-07_1744.jpg

David

Re: Bike mods - thanks to Amuli and Simple Simon.
 

Red and black gloves to match! You're as much as a tart as me!

Only thing, that hugger is simply not big enough, it ought to cover at least 50% of the wheel, based on current style trends.

Re: Bike mods - thanks to Amuli and Simple Simon.
 

Set by whom? :lol:

Re: Bike mods - thanks to Amuli and Simple Simon.
 

You didnt see THIS wot I go from the US ????

http://www.chaoscrypt.com/icon/timax2mesh.jpg

Re: Bike mods - thanks to Amuli and Simple Simon.
 

Everyone knows that the Welsh lead the world in matters of style:cool:

Oh and David - that jacket is the mutts':cool: :cool: :cool: but there appears to be a limbless torso inside it:o

Re: Bike mods - thanks to Amuli and Simple Simon.
 

I take it like all the top superheroes you have the 8-pack underneath to match the jacket? :mrgreen:

Re: Bike mods - thanks to Amuli and Simple Simon.
 

Better than that - I got a keg :)

Re: Bike mods - thanks to Amuli and Simple Simon.
 

Party at soulkisss jacket :joker:

Really cool jacket though, what material is it? It dosnt look leather. How much?!

Matt

Re: Bike mods - thanks to Amuli and Simple Simon.
 

UPDATE !!!

Got to practice my spraypainting at the weekend, building up to the big side panel respray.

Was looking for a large lump of plastic to test-spray, as just doing the filler pieces and the back top section of the fairing seemed not enough.

Lo and behold I "find" the rest of the seat cowl, so after a bit of wet-n-dry action, I got it prepped and sprayed.

So the back end of the bike is now a lot like this

http://www.chaoscrypt.com/sv/30-04-07_0909.jpg

Halfords Satin Black, unlaquered for those curious.

As for the jacket - it was part of my US haul and is a mesh fabric - Icon call it their "Fighter Mesh". Jacket is a Timax2 Mesh one - also available in Nylon and Leather :)

Cost me $240 US - so about £120 - well before 40% shipping and tax.....

Re: Bike mods - thanks to Amuli and Simple Simon.
 

Looking good there SoulKiss.