![]() |
Making the sv quicker
Now i know i havent got one nor have i ridden one yet but i am more into a bike which has quicker acceleration than top end, now i dont want a bike which only does 100mph but i have no desire to really go above this sort of speed, i have heard the sv naked sprockets will make it quicker but what will things like a K&N, exhaust system and a power commander do and what else could i do to it?? thanks for any help
|
Re: Making the sv quicker
When I got my bike(SV650S K6), it was happily capable of an indicated 147mph. Twice as fast as you're legally allowed to go. More than enough bike for the UK roads IMO (not taking into consideration things like suspension).
Then I changed the gearing, keeping the standard sprocket, but going up 2 teeth on the rear. I'm told this is the same as naked gears. At first, I noticed a massive difference in acceleration! Now it's not so noticeable, probably because I'm used to it. You do loose some top end, and a comfortable cruising speed is a little lower than it was before. Next I removed the snorkel (slight increase in air flow). I didn't notice any power benefits here, but the induction roar was nice. I'm still running on standard a standard air filter. I removed the snow shovel & fitted a smaller plate with an evotech tailtidy. Again, didn't see any power benefits. This & the snorkel have probably helped fuel consumption though. Next was an aftermarket can, a high level Scorpion. Again, no noticeable power gain/loss, but stick it on a Dyno & you'd see something different on the graph. Again, this could of helped with fuel consumption. I'm not sure how a full system would affect the bike, especially without a Dyno run to re-map the ECU. I reckon power commanders aren't needed, since you can re-map the stock ECU anyway. A K&N high-flow air filter will obviously allow more air in, but all that's likely to do is lean out fuel mixture a little. It depends if your bike is running rich or lean as to the affect more air will have. It'll either get you closer to perfect air/fuel ratio (and therefore more torque at a given RPM), or it'll lean it out too much. |
Re: Making the sv quicker
On a ride out yesterday, I was lucky enough to come up against a Ferrari 355 Spyder. For those of you that say an SV is not that fast, I promise you that the SV beat quite soundly the Ferrari from standing up to at least 70-80mph.
I know it is not big, nor clever, but the road was clear and this guy was trying to make a point. Bike is an SVS with race can and naked gearing, nothing else. I was astounded how well the SV did. Don't tell me off for this bit of 'boy racing' :smt105 Anyway, £2,000 worth of bike 1 £70,000 odd of Italian Exotica 0. :smt025 |
Re: Making the sv quicker
no harm in that is there just goes to show that you dont need to spend silly amounts of money to get the buzz and beat a stupid ferrari owner. :D :D
|
Re: Making the sv quicker
Quote:
If that was me, I would have gone straight home and put the car up for sale! :D |
Re: Making the sv quicker
Quote:
|
Re: Making the sv quicker
I'll let you in on a secret here... A tuned SV isn't actually that faster in road terms than a standard one. I find mine much nicer and more rewarding to ride quick, but it's not going to leave you for dead... Unles it's on a bumpy road anyway :)
|
Re: Making the sv quicker
Quote:
Anyhoo, a 14t front sprocket is a happy medium between 'pep' and reasonable revvs at motorway speeds on the SV ... and it'll only cost you a tenner and 15 mins to fit 8) |
Re: Making the sv quicker
Quote:
|
Re: Making the sv quicker
Quote:
I say, soundly beat, at around 80ish (private road of course) the bike had about a two bike lengths lead. :smt025 I know, not big and not clever. :smt105 |
All times are GMT. The time now is 05:33 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.