Bore out for an SV650
 

How much is it for the 750cc bore out kit for the SV650, and also where do you get it done?

Please spare me the mails about the rights and wrongs of it, I have decided I want it done!:D :D :D

Re: Bore out for an SV650
 

See HERE its JHS Racing... £1499.95

HTH's

Re: Bore out for an SV650
 

You just beat me to it...http://www.jhsracing.co.uk/suzuki_SV.htm

I was copying this link to JHS racing.

Re: Bore out for an SV650
 

Well f%uck that then. I will put the monet towards my RSV,

Happy days

Re: Bore out for an SV650
 

700cc is much less though... The parts are under £200 all in from Wiseco, IIRC (you can use JE too, but they're generally more expensive) and the work's not bain surgery. If you have a race tuner/builder, streetfighter specialist, etc near you then loads of places could do the job, but it's important that the bore be done right as they don't like poorly toleranced work. If you're mechanically competent, you could do the strip and build yourself, and the bore could be done for under £100- plus of course, you could post them for the bore. Best bet if you're doing this, I think, is to get spare barrels so you don't have to leave the bike in bits (and then, you still have the original barrels and pistons spare)

But, I still wouldn't do it ;)

Re: Bore out for an SV650
 

I paid less for my SV :shock:

You could prob get a zzr1100 for that sorta money and go blisteringly quick?

Matt

Re: Bore out for an SV650
 

buy an sv1000s if you like pointys, if not get a tl1000s nuff said.:)