Going straight(brake disc straighting)
 

Due to lots of dodgey eBay sellers (and my buys :smt021 !!), I have about 4-5 warped/bent/dished front brake discs. The warpage ranges between about 4mm on the best disc and 20mm runout on the worst!! :cry:

Is it possible to get them straightened??? If so how much is it? Is it cost effective?

Ta :)

Re: Going straight
 

20mm? Good lord. Use it as a boomerang?

I think some people are about to recommend Motoliners, so I shall get in first.

Re: Going straight
 

I have two straight front discs if you want them

Re: Going straight
 

20mm!

You did say, twenty mm, didn't you ???!!!!!!! :smt103 :smt103 :smt103


No wonder they took em off, that's downright dangerous. But how anyone could be so blatantly dishonest amazes me.


I'm not sure about straightening them, not heard of it myself.

Re: Going straight
 

To be fair that is the one I got off ASM-Forever's crashed bike!! :D not eBay, so can't blame that one on dodgy eBay sellers! ... the 'straight' eBay ones are still blatantly bent mind :(

Cheers, but I am not after any more (unless really cheap – a man can never have enough SV discs!! :D) just I have these lying about and I either need to bring myself to chuck them or get them straightened (if that is possible/viable).

Re: Going straight
 

Aaaahh that was your first mistake....underestimating the potential dodgyness of an intra-forum transaction :p

Re: Going straight
 

Difference is I expected yours to be bent ... I bought the ebay ones after asking them if they were 'straight' and them saying yes!!!! :smt103

Re: Going straight
 

Then return them and give ****ty feedback...thats what its there for!

If you paid by Paypal, then even easier!

Re: Going straight
 

By the time you have spent say £15 postage one way then £10 to get it back to them (with no guarantee of a refund) its just throwing good money after bad!! One bloke was being a total {bleeep} so I left him bad feedback!! :D (but didn't get any money back :cry:)Another bloke admitted a bit of liability and gave a partial refund, I still lost out though as I had a set of discs that were unusable and paid postage for two popadoms!!! :smt021

Re: Going straight(brake disc straighting)
 

Hammer them flat. If you hammer them enough, you'll get extra braking force from your new 320mm discs.