Help fitting rear hugger
 

got it off one of the members.
know about the two bolts on the chain side but carnt seem to do the other side. what do i do with the brake pipe:confused:.
please can someone help as i want to go out in the sunshine.

its ment to say help not hepl. lol

Re: hepl fitting rear hugger
 

depends which hugger it is

Re: hepl fitting rear hugger
 

just taking a pic for u

Re: hepl fitting rear hugger
 

Coincidence - just fitted mine not 10 mins ago. I used the screws from the chainguard on one side. On mine I used the bolt once I removed that bit of plastic behind the rear shock, and then took the bolt out from the thingy that holds the rear brake line in place and used that. I then cut the clip thingy off with a hacksaw - the line of brakeline is so short I didnt think it needed it.

HTH, BB

Re: hepl fitting rear hugger
 

if the hugger fits flush to the swingarm all the way around the only thing i can think of is cut out a little notch, or redirect the brake pipe by taking the caliper off?

Re: hepl fitting rear hugger
 

On the huggers I've seen the brake line runs "outside" them. As in you really shouldn't need to cut holes for it.

Re: hepl fitting rear hugger
 

the bolts are to short on the chain gard. plus it looks **** with it sort of on. so i think its going in the bin!

Re: hepl fitting rear hugger
 

why not PM who you got it off, as they will know how to fit it?

Re: Help fitting rear hugger
 

tbh mate looks loads better without in on lol (love wasting my money) lol

Re: Help fitting rear hugger
 

put it on ebay?