SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Pc3 wireing instructions (http://forums.sv650.org/showthread.php?t=96086)

Davie 01-09-07 02:38 PM
Pc3 wireing instructions
 
Has any one got a link were i could get fitting instructions for a uk spec k6

lawson17 01-09-07 04:52 PM
Re: Pc3 wireing instructions
 
Have you tried DynoJets website?

The two black plugs go in-line with the injectors, the smaller grey wire goes on the TPS, and the black wire closest to the PC3 goes to Ground.

Hope that helps.:D

lawson17 01-09-07 04:54 PM
Re: Pc3 wireing instructions
 
http://www.dynojet.co.uk/powercommander/manual.htm

This page might be useful. :D

Davie 01-09-07 05:20 PM
Re: Pc3 wireing instructions
 
It's the small grey one thats the problem

lawson17 01-09-07 05:23 PM
Re: Pc3 wireing instructions
 
There should be a small red scotch block type connector. This clips round one of the TPS wires, not sure which one? Then the small grey wire plugs into the red connector.

I'll see if I've got any photos.

Davie 01-09-07 06:20 PM
Re: Pc3 wireing instructions
 
Your the top man lawson17

lawson17 02-09-07 06:58 AM
Re: Pc3 wireing instructions
 
Do you still needa pic Davie?

I havn't got one to hand but i'll go take one if it helps?

Davie 02-09-07 10:20 AM
Re: Pc3 wireing instructions
 
Thanks Pics would good


All times are GMT. The time now is 09:01 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.