Help required fitting a GSXR1000 K6 shock
 

This is a request for help from some mechanically cometent people on this site.


I now havea K6 GSXR shock ready for fiting but am no way going to attempt to do the job myself.

So i was wondering if anoyone on here would be able to offer their help/expertise to give me a hand one weekend??

obviously i would come to you.

Re: Help required fitting a GSXR1000 K6 shock
 

I just did a shock fork upgrade, your welcome to stop over but the distance might take some time...I am in Detroit. ;-) If you are relatively handy, the well-published instructions will guide you along.

Re: Help required fitting a GSXR1000 K6 shock
 

Thanks for the offer but I think you might be a little to far away to help me properly.

Bump,

Any offers anyone??

Re: Help required fitting a GSXR1000 K6 shock
 

its not hard if you have questions pm me well not hard if you have a tool set and a garage or something you can put a strap over a beam to lift the back end up

Re: Help required fitting a GSXR1000 K6 shock
 

I have some tools, but no way to suspend the back end properly.

Re: Help required fitting a GSXR1000 K6 shock
 

Axle Stands under the footpegs. It is a piece of cake mate. Litterally 8 Bolts. Whip em out clean em up. A dab of Copper grease and slide in the new shock. Put the bolts back in and torque up. Did my rear elka shock in about half an hour.