SV650.org - SV650 & Gladius 650 Forum - Datatool System 3 Alarm Woes

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)

- - Datatool System 3 Alarm Woes (http://forums.sv650.org/showthread.php?t=99541)

Datatool System 3 Alarm Woes

My bike is fitted with a Datatool Sysyem 3 alarm. Just recently, everytime I leave my bike to auto activate the alarm, which happens 30 seconds after the ignition is turned off, the alarm goes off. If I then deactive the alarm and re-activate it manually it is fine.

Next time as soon as it happens I will put it into Service Mode to count the beeps which will tell me the reason for the alarm going off.

Has anybody else come across this before?

Hope it's not toast, as I don't think they sell the System 3 anymore.

Tim.

Re: Datatool System 3 Alarm Woes

That's nothing, ask Jester about Datatool system 3's ;)

Oh and it's probably to sensitive or one of the trips is loose, try turning the unit on it's side.

Cheers Mark