SV650.org - SV650 & Gladius 650 Forum - View Single Post

30-07-06, 02:02 PM

Any non-silicate ethylene glycol antifreeze mixed 50/50 with distilled water. There are many out there that are specifically for aluminum engines. You can mix up a half gallon (one quart distilled water and one quart antifreeze) to keep on hand for topping off. You metric types substitute liters for quarts.

However, if you are topping up more than a small amount every couple of months you should snug down all the hose clamps to see if that stops the seepage.

30-07-06, 02:02 PM	#2
andyauger Guest Posts: n/a	Anti freeze Any non-silicate ethylene glycol antifreeze mixed 50/50 with distilled water. There are many out there that are specifically for aluminum engines. You can mix up a half gallon (one quart distilled water and one quart antifreeze) to keep on hand for topping off. You metric types substitute liters for quarts. However, if you are topping up more than a small amount every couple of months you should snug down all the hose clamps to see if that stops the seepage.