SV650.org - SV650 & Gladius 650 Forum - View Single Post

Luckypants · 13-03-07, 01:04 PM

Don't think so, not a direct fit. SV1000 cans bolt on to the pipes. SV650 can is welded to the pipes.

To fit a can to the 650, you have to cut the exhaust pipe, then fit the can to the cut pipe (sometimes using a link pipe) with a clamping fitting supplied with the can.

If you really wanted the SV1000 can to fit, you could get a link pipe made up with the bolt up fitting flange. Cut the pipes on the 650, fit the link pipe and then bolt on the SV1000 can. Seems a lot of effort IMO.

13-03-07, 01:04 PM	#2
Luckypants Moderator Mega Poster Join Date: Jul 2003 Location: Nr Ruthin Posts: 7,079	Re: SV1000 can on a 650? Don't think so, not a direct fit. SV1000 cans bolt on to the pipes. SV650 can is welded to the pipes. To fit a can to the 650, you have to cut the exhaust pipe, then fit the can to the cut pipe (sometimes using a link pipe) with a clamping fitting supplied with the can. If you really wanted the SV1000 can to fit, you could get a link pipe made up with the bolt up fitting flange. Cut the pipes on the 650, fit the link pipe and then bolt on the SV1000 can. Seems a lot of effort IMO. __________________ "Your Viffer sounds like it is raising hell! Spot on." - Witchery 17/4/08 Snow Plough Appreciation Society - Member #3