SV650.org - SV650 & Gladius 650 Forum - View Single Post

01-05-07, 01:14 PM

Your local maplin will sort you out. Bosch style SPDT relay, either 30A or 40A (I always use 40A) for 12v circuits. 40A is N02AW, 30A is N00AW (stock codes).

The wires from your old horn will need blue female (insulated) spade connectors on. These go on pins 85 & 86 (doesn't matter which). Then run a wire from the battery +ve to 87. Then run a wire from 87a to ground (battery -ve or frame).

I'm with Luckypants, whilst a relay might not be essential, I don't want to risk it on my bike.

EDIT: Hovis, the whole point of putting another one on the other side is to have two. I can sell you my stock meeper if you like

BTW, Wales rideout thread, I asked if you were coming to pickup those hotgrips.

01-05-07, 01:14 PM	#7
Baph Guest Posts: n/a	Re: Stebel Magum Fitting on a Pointy. Your local maplin will sort you out. Bosch style SPDT relay, either 30A or 40A (I always use 40A) for 12v circuits. 40A is N02AW, 30A is N00AW (stock codes). The wires from your old horn will need blue female (insulated) spade connectors on. These go on pins 85 & 86 (doesn't matter which). Then run a wire from the battery +ve to 87. Then run a wire from 87a to ground (battery -ve or frame). I'm with Luckypants, whilst a relay might not be essential, I don't want to risk it on my bike. EDIT: Hovis, the whole point of putting another one on the other side is to have two. I can sell you my stock meeper if you like BTW, Wales rideout thread, I asked if you were coming to pickup those hotgrips.