Re: My c.v.
Stuarty, deffo need the suspension done mate! and the front forks need adjusted!
on the list...
coolant renewed
Oil and filter change.
Brakes cleaned and new pads & new brake lines
Clutch cable adjustment/replacement (think its stretched but going to attempt to adjust it at the sprocket if needed)
i'm going to have a go doing the throttle body snychronisation, noticed i need a tool with some gauges and tubes coming from it. Any help appreciated if someone can already do it or help me source the tool. If i can suss it then it's going to be a wack of money saved for everyone!
they way i see is if someone can do a bit of this and that then all we have to do is travel to each others places to get the various jobs done.
__________________
Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts  ), drop it & fix it again!
K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.
Last edited by muzikill; 18-05-07 at 06:27 PM.
|