View Single Post
Old 17-07-07, 10:41 PM   #4
jonboy99
Guest
 
Posts: n/a
Default Re: R6 Throttle tube mod done

Quote:
Originally Posted by Lozzo View Post
And it works.

Travel is drastically reduced from 1/4 turn to less than 1/5 turn, from closed to fully open.

I used Yamaha part number 5SL-26240-01-00 on a '03 model naked pointy. Modifications to the R6 throttle tube to ensure it was fully opening and closing in the SV housing were made as per the pictures found here :

http://forums.sv650.org/showthread.php?t=83740&page=2

Cost was about 8 quid and the tube came with the throttle grip rubber, so well worth it.

Nice
How long did it take? Is the throttle grip the same diameter as the original one on the left bar?
  Reply With Quote