View Single Post
Old 17-07-07, 11:54 PM   #6
ASM-Forever
Guest
 
Posts: n/a
Default Re: R6 Throttle tube mod done

Quote:
Originally Posted by Lozzo View Post
And it works.

Travel is drastically reduced from 1/4 turn to less than 1/5 turn, from closed to fully open.

I used Yamaha part number 5SL-26240-01-00 on a '03 model naked pointy. Modifications to the R6 throttle tube to ensure it was fully opening and closing in the SV housing were made as per the pictures found here :

http://forums.sv650.org/showthread.php?t=83740&page=2

Cost was about 8 quid and the tube came with the throttle grip rubber, so well worth it.

Nice
Good start.....just the rest of an R6 to transplant over
  Reply With Quote