Quote:
Originally Posted by bluethunder
But with the SV there is another which at the top of the handle bar where the control blocks are. So I cut that off sanded it down with wet and dry. I spent a load tiem wear it down but the grip still won't budge over the top to make snug fit like the clutch side one does.
|
I got a file and filed it down- much quicker then sanding it...
I also trimmed the hotgrips down a little where the weights go, abuot 3 or 4 mm of rubber before the large ring around the grip. (ill get a photo of this if you dont get what i mean...)
As for wiring, if you look in your fuse box, there is a thick Orange wire going to what is the middle of three "holes". I connected my hotgrips to one of the two empty ones. These are connected though the ignition- only on when the bike is on. On the other hand if you are wiring to the lights you want the SIDE LIGHTS not the brake lights! Not sure how this would work with the rear lights as they are just a row of LED's which prob draw less then the hotgrips would...