iaincX04

Hi all

Hopefully this is a really simple problem to fix. I've had my scottoiler 6 months, and all was great with it, but it's just stopped flowing through onto the chain.

The reservoir's full, and I can see that the oil is flowing all the way nearly to the nozzle which sprays it onto the chain but it's stuck there, so it must be an air block. I've tried running the bike without the end nozzle of the scottoiler in, and have shoved a bit of wire into the tubing to try and find a blockage.. Is there anything else I could try? Do I have to run it when the flow rate is at max to have the best chance of clearing it?

Any pointers appreciated. Thanks

Iain