SV650.org - SV650 & Gladius 650 Forum - View Single Post

14-01-08, 05:16 AM

Hello,
I recently shelled out the big bucks for a Tail Tidy for my 2006 SV650S but I'm having problems putting everything put back together. I'm hoping someone here might have had the same problem and can help me.

The rear fairing will not go forward enough to allow me to bolt everything up. I'm guessing it's off about 5mm. The fairing acts as though it's hanging up towards the back near the Tail Tidy but I can't pinpoint exactly where.

I verified that neither the tail light wire or seat lock cable are interfering. The neoprene side of the sealing plate is down and on top of the under tray and underneath the fairing. My invoice indicates I have product code 4201 for 2005-2007 SV's.

Any help would be greatly appreciated.
-Mark

Edit: I used the search function but didn't anyone having the same problem.

14-01-08, 05:16 AM	#1
pearsonm Guest Posts: n/a	Problem with Fairing fitting Tail Tidy Hello, I recently shelled out the big bucks for a Tail Tidy for my 2006 SV650S but I'm having problems putting everything put back together. I'm hoping someone here might have had the same problem and can help me. The rear fairing will not go forward enough to allow me to bolt everything up. I'm guessing it's off about 5mm. The fairing acts as though it's hanging up towards the back near the Tail Tidy but I can't pinpoint exactly where. I verified that neither the tail light wire or seat lock cable are interfering. The neoprene side of the sealing plate is down and on top of the under tray and underneath the fairing. My invoice indicates I have product code 4201 for 2005-2007 SV's. Any help would be greatly appreciated. -Mark Edit: I used the search function but didn't anyone having the same problem.