Quote:
Originally Posted by Furry Ginger One
Can't honestly say I have ever had problems with them. Possibly a bit tricky getting them out but I just pull them out carefully by holdind the outside of them. Putting them back in is a doddle.
Once you have taken them out, put them in a cup of hot water.
Go back to the bike and take out the 2 screws and then the old screen.
Position the new screen (making sure you do not fold the spongey type strips)
Put the 2 screwws back in (loosely)
Get the rubber bits out of the, now warm, water and re fit them. They go back to their original shape after being in the water for a few minutes so go back in easy.
Then just refit the allen bolts. Job done.
|
Quote:
Originally Posted by Tim in Belgium
Yep, the hot water trick works wonders on straightening your rubbers.
|
So are you guys talking about the OEM bungs that have an extra "bulge" in them. I can understand the straight bungs, the type you get with aftermarket bolts, doing what you discribe but I'm sure there is no way that bulge is gonna disappear with some hot water oooeer.
Pic below is of the two types. OEM curvy on the right.
