Re: Curvy clutch
Originally Posted by Sid Squid:
Slacken off cable adjusters at top and bottom, loosen lifter locknut, back out screw a bit, ensure that lifter arm is as far down as it will go, gently turn screw in until it contacts pushrod, back it out a bit, (~1/8th of a turn), then nip up the locknut, roughly adjust cable with lower adjuster - not too tight - then with top adjuster ensure that there remains a little slack all the way from lock to lock.
__________________
"We are the angry mob,
we read the papers every day
We like what we like, we hate what we hate
But we're oh so easily swayed"
|