SV650.org - SV650 & Gladius 650 Forum - View Single Post

22-09-08, 01:48 PM

hi plowsie...

im sure ur mechanical knowleadge is far greater than mine, however i have got at the carbs recently.....

i personally didnt remove any of the fairing...

i used a long (about 12 inches) phillips screwdriver (*2) to get at the screw on the clamp that holds the carbs on (from the right if ur sitting on the bike) and this worked fine...bit fiddly gettin back on but ok....

good luck!

22-09-08, 01:48 PM	#2
Dappa D Guest Posts: n/a	Re: Carb removal hi plowsie... im sure ur mechanical knowleadge is far greater than mine, however i have got at the carbs recently..... i personally didnt remove any of the fairing... i used a long (about 12 inches) phillips screwdriver (*2) to get at the screw on the clamp that holds the carbs on (from the right if ur sitting on the bike) and this worked fine...bit fiddly gettin back on but ok.... good luck!