SV650.org - SV650 & Gladius 650 Forum - View Single Post

Rich · 19-02-09, 06:24 AM

The most common way a gsxr speedo is wired to an sv is through a hall sensor and magnets as sensors somewhere on the front wheel or disc brake. The mecahnic should have an idea as to what one is. As for him saying the wire goes nowhere unless the sensors fell off it should still be there. I expect the sensors been moved with the work you've had done, it only has to be out abit too far for it not to pick up the magnets. Have a look and see if you can trace the sensor then you might be able to find your problem.

Rich

19-02-09, 06:24 AM	#2
Rich Member Mega Poster Join Date: Nov 2006 Posts: 1,089	Re: speedo problem w/ GSXR front end The most common way a gsxr speedo is wired to an sv is through a hall sensor and magnets as sensors somewhere on the front wheel or disc brake. The mecahnic should have an idea as to what one is. As for him saying the wire goes nowhere unless the sensors fell off it should still be there. I expect the sensors been moved with the work you've had done, it only has to be out abit too far for it not to pick up the magnets. Have a look and see if you can trace the sensor then you might be able to find your problem. Rich __________________ RIP Hovis - Unlucky Boyo