SV650.org - SV650 & Gladius 650 Forum - View Single Post - Balance carbs after fitting FI washers Worth it?

rictus01 · 06-03-09, 01:43 PM

Carb balancing will have no direct effect on the washer placement at all, although good practise should see you do it after playing with the carbs for any reason, but generally if they were out to begin with then after fitting, they will still be out and likewise if they were correct, they will still be that way.

Mixture on the other hand (rich or lean) could be effected, but most seem to run fine.

Cheers Mark.

06-03-09, 01:43 PM	#4
rictus01 Member Mega Poster Join Date: Jul 2003 Location: South London Posts: 9,799	Re: Balance carbs after fitting FI washers Worth it? Carb balancing will have no direct effect on the washer placement at all, although good practise should see you do it after playing with the carbs for any reason, but generally if they were out to begin with then after fitting, they will still be out and likewise if they were correct, they will still be that way. Mixture on the other hand (rich or lean) could be effected, but most seem to run fine. Cheers Mark. __________________ Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!