View Single Post
Old 06-04-09, 02:25 PM   #27
yorkie_chris
Noisy Git
Mega Poster
 
yorkie_chris's Avatar
 
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
Default Re: suspension question - what and why

Quote:
Originally Posted by Domas View Post
Ok, good to know. And shocks from other bikes like ninja and gsxr? Are they better/worse than aftermarket shocks made for SV? Are they usable on road? I suppose shocks from supersport bikes should be a bit on a stiff side, no?
No. To take an example the GSXR 600 SRAD shock is much softer. 750 is a little harder (iirc) but longer and works well.
They will not behave as well as a shock built for SV and importantly built for the rider. But they are 1/10th the price.

Quote:
Originally Posted by Domas View Post
If you do get Hagon shock, please write your impressions here, so I don't miss it Seems like Hagon shock is one of the cheapest aftermarket shocks around, so it's an interesting alternative.
I would not bother with a hagon. They are not much different from stock, still an emulsion type shock, though they may be better set up (higher spring rate, thicker oil perhaps).

Given some cash to blow I would take a SRAD 750 shock, send it to maxton or PDQ and get them to spring and valve it for me.
Total cost about £280 and this will work, for all intents and purposes, as well as ohlins etc.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat
yorkie_chris is offline   Reply With Quote