SV650.org - SV650 & Gladius 650 Forum - View Single Post

Nobbylad · 26-05-09, 01:56 PM

Get a nail punch that will fit inside the rivet, give it a good few whacks with a hammer, then drill out the rivet.

Coat the baffle liberally with WD-40, go for a cuppa, come back with decent sized grips and pull/wiggle it out.

Chuck baffle in a plastic bag together with a self tapping screw/bolt and shove under seat in case you get pulled.

That's all I've done.

26-05-09, 01:56 PM	#5
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: How To: Remove CCC Can baffle? Get a nail punch that will fit inside the rivet, give it a good few whacks with a hammer, then drill out the rivet. Coat the baffle liberally with WD-40, go for a cuppa, come back with decent sized grips and pull/wiggle it out. Chuck baffle in a plastic bag together with a self tapping screw/bolt and shove under seat in case you get pulled. That's all I've done.