SV650.org - SV650 & Gladius 650 Forum - View Single Post

28-05-09, 05:06 PM

Right hand side and the front of the 2 that the R&G's fit to on the K3 onwards. Just been looking at it and there is no way I can get it out without dropping the engine.

Dont have an extractor long enough with it fitted. Bacause it has sheared at the join between the engine spacer and the cylinder head. So i'd have to go through the frame and spacer to get to it.

Bain of my life these cheap chesse suzuki bolts!

28-05-09, 05:06 PM	#3
Sideshow#36 Guest Posts: n/a	Re: Sheared Engine Bolt! Right hand side and the front of the 2 that the R&G's fit to on the K3 onwards. Just been looking at it and there is no way I can get it out without dropping the engine. Dont have an extractor long enough with it fitted. Bacause it has sheared at the join between the engine spacer and the cylinder head. So i'd have to go through the frame and spacer to get to it. Bain of my life these cheap chesse suzuki bolts! Last edited by Sideshow#36; 28-05-09 at 05:08 PM.