SV650.org - SV650 & Gladius 650 Forum - View Single Post

Biker Biggles · 02-06-09, 01:04 PM

Its really simple.Loosen the wheel spindle nut(very tight) and use an allen key to tighten with the two bolts right on the rear ends of the swingarm.(One each side)Turn them clockwise (Just a bit and same each side) to get right slack,then tighten everything up again.Re check tightness to ensure you got it right.

02-06-09, 01:04 PM	#6
Biker Biggles Member Mega Poster Join Date: Jan 2005 Location: Barnet Herts Posts: 5,071	Re: Chain Question Its really simple.Loosen the wheel spindle nut(very tight) and use an allen key to tighten with the two bolts right on the rear ends of the swingarm.(One each side)Turn them clockwise (Just a bit and same each side) to get right slack,then tighten everything up again.Re check tightness to ensure you got it right. __________________ On a clear day we stand there and look further than the ordinary eye can see.