Baph

I use an NWS ULTI-MOTO regularly.

With that, there's a rather large bit of box section that acts as a base, not the little bracket you get on the other NWS. The ULTI-MOTO also has a 2foot metal pole to pivot the bike up with.

There's one long "leg" (inserts into the swingarm pivot and goes under the bike) and one short "leg" (inserts into the swingarm & has a hole for the long leg to insert into).

The long leg does in the pivot point at the gear lever side, the shorter one on the brake side. The two together, once secure, lay forward of the pivot points.

Insert the "feet" section underneath, then lift the bike upright, use the pole to lift the back wheel off the floor (the whole bike will move forwards at this point) & lock the long leg into place on the foot using the spring bolt provided.

Job jobbed, and easily possible by yourself.