Svsmokey

And now for something completely different ! I took a piece of aluminum plate (dump truck bed liner) , cut it to shape , cut a coupe of slots in it and hammered between the slots to replicate the seat hook . bolted on a latch pin from an old bandit seat . Cut a piece of plywood and bolted it thru the bag of my choice into the plate . Looks bitchin (no visible means of support) and changes from rear seat to pack in an instant using the key . U can also drill some bungee holes. In the plate for more versatility . Tools required are a hand grinder with a cutoff wheel , a drill , a hammer and wrenches . The plate is about 3/16 " thickl