SV650.org - SV650 & Gladius 650 Forum - View Single Post - Motrax Flash-It solid state relay

Sid Squid · 13-07-09, 09:23 PM

Right I've just had another squint at the wiring diagram, I don't have a specific K5 diagram here at the mo, but if the colours are the same as the one I have got, (and I'm fairly sure they are), there are, as you say, seven wires all tolled in the block, they are; blue/black, blue, green, orange/yellow, orange/black, brown, light blue.
The brown is the live supply to the flasher - to the red wire on the new relay, the light blue is the connection to the switch, (the load), and goes to the black wire on the relay.

13-07-09, 09:23 PM	#25
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: Motrax Flash-It solid state relay Right I've just had another squint at the wiring diagram, I don't have a specific K5 diagram here at the mo, but if the colours are the same as the one I have got, (and I'm fairly sure they are), there are, as you say, seven wires all tolled in the block, they are; blue/black, blue, green, orange/yellow, orange/black, brown, light blue. The brown is the live supply to the flasher - to the red wire on the new relay, the light blue is the connection to the switch, (the load), and goes to the black wire on the relay. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"