Quote:
Originally Posted by yorkie_chris
Speedo looks almost certainly a cable type, so you can get rid of the cable, leave the drive in the wheel (or replace it with some spacer if you're concerned about weight)
You'll then have to put a magnet on a wheel and line the sensor up with it (these almost always come in the kit)
|
Like I said before, if you speak to the guys at Quadtech they will sort out a converter to actually make use of your old speedo cable (Thats if you want. Because often a lot of people that have used the Acewells, have often upgraded the magnet that gets supplied), it's what I did and was so much easier.