SV650.org - SV650 & Gladius 650 Forum - View Single Post

14-04-10, 08:28 PM

to start with look for a universal baffle off ebay then fit it (may need to drill a small hole for the bolt in the exhaust out let)

fitting the exhaust is easy

if you look at the exhaust just under the rider foot peg you can see a weld mark 2inch up from that towards the back of the bike, then cut straight through the pipe on the marked point cut so its 2inch from that well all round then the link pipe will slip over and you can then fit the other pipe

EDIT if you look at the blue mark thats the weld you need to cut 2 inch up from that where the yellow line is

14-04-10, 08:28 PM	#2
barwel1992 Guest Posts: n/a	Re: Fuel exhaust baffle to start with look for a universal baffle off ebay then fit it (may need to drill a small hole for the bolt in the exhaust out let) fitting the exhaust is easy if you look at the exhaust just under the rider foot peg you can see a weld mark 2inch up from that towards the back of the bike, then cut straight through the pipe on the marked point cut so its 2inch from that well all round then the link pipe will slip over and you can then fit the other pipe EDIT if you look at the blue mark thats the weld you need to cut 2 inch up from that where the yellow line is Last edited by barwel1992; 14-04-10 at 08:35 PM.