The bike got Smashed up 2 months ago so I thought I'd go for the gsxr frontend I wanted but didn't take the plunge. I've gone for
k2 tho forks with 750 k3 top yoke
Hayabusa tokico 6 pot calipers
My sv galfer lines
Tl1000 clip ons
Srad 750 front wheel with discs
Honeywell sensor from rs
As this set up does not bolt straight on if had alot of running around and Agro but the end result has been worth it as I have a matching front wheel to the rear and nice big brakes
I managed to get panels I needed and sort out the spares I had. As this was being done on a budget I gave spraying the panels myself a Toyota e53 red. While I was at it I gave the engine a coat of vht metallic grey
Started getting the front end to work by turning down the front spindle and making a spacer to bring the wheel centre to the forks. Once that was done mdf templates were made to mount the calipers and house the speedo sensor. These were then sent to the Cnc guy to make the final product
Wheel powder coated and new bearings/seals
Bearings/seals in and disc's fitted
Caliper hangers
Had to remove 2mm from the caliper mounts to get them dead centre to the disc's
All centred.
Speedo pickup fitted
All done and ready to fit to bike.
