SV650.org - SV650 & Gladius 650 Forum - View Single Post

03-01-11, 04:16 PM

Just used a couple of mine. Gave the bike a full service plus a couple of other bits. If you use the 14mm ratchet on the end of the hinged spark plug tool from the tool kit you can get the front plug out without too much trouble. Didn't even need to take the horn off on the curvy.

03-01-11, 04:16 PM	#5
B1k3R Guest Posts: n/a	Re: Spanner set recommendation Just used a couple of mine. Gave the bike a full service plus a couple of other bits. If you use the 14mm ratchet on the end of the hinged spark plug tool from the tool kit you can get the front plug out without too much trouble. Didn't even need to take the horn off on the curvy.