SV650.org - SV650 & Gladius 650 Forum - View Single Post

DavieSV · 10-02-11, 02:03 PM

I made three different sizes:

0.30mm
0.40mm
0.50mm

then I put different combinations in and fitted the swing arm pivot, felt the play, removed the pivot swapped shims and refitted untill I was happy with the feel.

I had nearly 1.10mm of end float, and from memory put in 0.90mm of shims to allow the swing arm to move freely with as little as possible end float.

10-02-11, 02:03 PM	#6
DavieSV Member Join Date: Nov 2005 Location: Ripley Derbyshire Posts: 596	Re: swing arm play I made three different sizes: 0.30mm 0.40mm 0.50mm then I put different combinations in and fitted the swing arm pivot, felt the play, removed the pivot swapped shims and refitted untill I was happy with the feel. I had nearly 1.10mm of end float, and from memory put in 0.90mm of shims to allow the swing arm to move freely with as little as possible end float.