SV650.org - SV650 & Gladius 650 Forum - View Single Post

rictus01 · 22-04-11, 11:23 PM

there is a plastic lug on the inside of the switch housing which locates in a recess in the bars, it sounds like this bit has broken away.

Take it off the handlebar and check this is the case, if so get a selftapping screw, screw it into the centre of the broken base of the lug, cut the top off to a length of 4-5mm, make sure the thread part locates in the recess on the bar and re-assemble.

Cheers Mark.

22-04-11, 11:23 PM	#2
rictus01 Member Mega Poster Join Date: Jul 2003 Location: South London Posts: 9,799	Re: 2002 L/H Switch Gear there is a plastic lug on the inside of the switch housing which locates in a recess in the bars, it sounds like this bit has broken away. Take it off the handlebar and check this is the case, if so get a selftapping screw, screw it into the centre of the broken base of the lug, cut the top off to a length of 4-5mm, make sure the thread part locates in the recess on the bar and re-assemble. Cheers Mark. __________________ Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!