Hey all
My curvy has a starting problem. When u push the switch nothing happens. No noise of the start motor or of the relay.
But everything elsa works fine.
Ill tell you what iv done. My fan never seems to come on so i bypassed the fan switch by unplugging the connector and Just pushing a bit of wire into the loom end. Turn the ignition on and the fan bursts into life.
Nice one so i need a new fan switch
Whilst the ignition was on and the fan was running (bypassed) i tryed to start the bike. No idea why but i did. Had one clonk then nothing. Turned it all off. pluged the fan switch back in and looked at all the fuses.
They are all ok even looked at the starter relay one all fine. Turn the ignition back on and go to start the bike nothing at all. It is as if your trying to start the bike when it is off.
Side stand and clutch switch are fine. But im not even getting a clicking noise from the relay.
So iv taken my battery out and stuck it on trickle charge to see if that helps. As i did have the bike running on tic over for 20 mins to see if the fan would come on.
Im hopeing its just a flat battery. What do the org think ??
Cheers