SV650.org - SV650 & Gladius 650 Forum - View Single Post

Bibio · 03-03-12, 06:29 PM

clean all mating surfaces with 'spirit' then lightly smear some instant gasket on rubber mating faces.

i would check that there is no grooves, chips or bits on any of the surfaces. might be a good idea to check the straightness of the cover/head mating faces with a steel rule.

03-03-12, 06:29 PM	#7
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Oil weeping from valve cover clean all mating surfaces with 'spirit' then lightly smear some instant gasket on rubber mating faces. i would check that there is no grooves, chips or bits on any of the surfaces. might be a good idea to check the straightness of the cover/head mating faces with a steel rule.