keith h

Hi Andy, if it were me I would give the bike a good going over.
i.e. oil & filter change, air filter change, coolant change, brake fluid change, spark plug change, chain clean & grease + adjust as necessary.
Oil all linkages etc
All of these items are fairly easy to do and could save you a tidy sum.
When the air filter is out check throttle plates free of muck
Remove brake pads front & back & inspect for wear, check pistons moving ok.
Check all nuts & bolts for tightness.
Last but not least check tyres for condition & pressure
There are service kits on the bay but check for quality, get a genuine oil filter if poss. Should you need brake pads get a reputable make. regards Keith h