View Single Post
Old 13-06-12, 12:35 PM   #1
Willy-sv
Guest
 
Posts: n/a
Default remake of the supports for the givi suitcases

Hi everyone!

Well I´m new here, so I´ve to introduce myself, I´m from Madrid, Spain, and I've a sv650s k5 since 4 years. I let a photo of my "susy" and me.


Well, so this July I´m going to travel from Madrid to North Cape with four friends. So we need to carry luggage, and for this I decided to buy the givi
tph01.


I didn't want to carry a big suitcases, so finally I decided to buy these in spite of there weren't available for our suzuki. No problem,I compared the different models available with this suitcase and also the anchors (sorry for my english) and I thought that the most similar was the anchors of the Yamaha XJ6/ XJ6 División 09>10


so let start! We remove the passenger seat


we decided to fix the anchors to these four point that shown in the picture


we put the anchors near to the tail and decide the position, the anchors were joined to the tail through welding a special pieces.


the lowest anchor, we decided to put there (shows in the picture)


so we cuted and fold the anchors to the desired position


the measurements of the rear plates is 12 cm ... measure, mark cut







continue...

Last edited by Willy-sv; 13-06-12 at 03:17 PM.
  Reply With Quote