SV650.org - SV650 & Gladius 650 Forum - View Single Post

MJC-DEV · 19-06-12, 01:52 PM

M6 x 10 (or 12) I think, but I doubt if you could reuse the thread. I would through drill and use an M6 x 12 stainless cap head with stainless nylock nut. If the thread is ok then omit the nyloc nut and use lots of copper grease.

19-06-12, 01:52 PM	#2
MJC-DEV Member Join Date: Mar 2011 Location: Falmouth Posts: 621	Re: Screw size oil cooler guard? M6 x 10 (or 12) I think, but I doubt if you could reuse the thread. I would through drill and use an M6 x 12 stainless cap head with stainless nylock nut. If the thread is ok then omit the nyloc nut and use lots of copper grease. __________________ 2006 SK6, wavy discs, 8.5N K-Tech springs, Debrix Emulators, Nitron Shock, Silkolene RSF Pro 10W, Eastern Beaver H4 Dual Headlight Relay Kit, Avon Storm Ultra 2 tyres, Ebay billet brake/clutch levers