If you broke a chain then a damaged rod is likely, the external part of the rod simply pulls out of the seal in the cases, remove it and examine it carefully - it's bent or otherwise damaged the clutch probably won't work properly, if it isn't obviously damaged refit it and adjust the clutch, if it works OK it is OK.
Clutch adjustment:
Quote:
|
Originally Posted by Me, lots
Slacken off cable adjusters at top and bottom, loosen lifter locknut, back out screw a bit, ensure that lifter arm is as far down as it will go, gently turn screw in until it contacts pushrod, back it out a bit, (~1/8th of a turn), then nip up the locknut, roughly adjust cable with lower adjuster - not too tight - then with top adjuster ensure that there remains a little slack all the way from lock to lock.
|