SV650.org - SV650 & Gladius 650 Forum - View Single Post

06-11-12, 04:05 PM

Hey everyone,

I'm new to this sort of thing and would really appreciate some help. Right I've had my Sv for about a month now and its been perfect, no issues whatsoever. I went to start my bike yesterday before work and it started first time, like it always has. Then after about five minutes it just cut out! I then of course went to start it again and nothing at all happened! Literally nothing the bike didn't turn over it made no noises. The only thing that worked was the lights, horn and indicators etc. So i left the bike as i had to go to work and came back to it today. I did a bit of research and found other people who had a similar problem. I thought great! Now I have tried everything everyone has suggested. The battery has been fully charged, I've replaced it with a new one, jumped it with the car! Still nothing so i ruled that out. I then tried the killswitch was off and then changed the whole unit to make sure it wasn't faulty of my dads bandit. Nothing! So i tried the clutch killswitch, i cleaned it, i bypassed it. Nothing again -_- ! So the last killswitch being the kickstand i did the same..... you guessed nothing! So i had a look round took it to pieces to look for a loose wire and cleaned everything i could find. That didn't help. I've managed to get it to turn over now but only by jumping the starter solenoid with a screwdriver, so i know its not mechanical. That all works as it should. I am now completely out of ideas and really need help because this is driving me crazy !!! The only thing i can think of is maybe my alarm/ immobiliser is stuck on and stopping it from starting but i don't see how this would happen? Its a Laserline 862 and has never caused me any problems. It turns on and off as it should but of course it has been connected to the wiring loom. And yes it was fitted professionally.Oh i've also checked all the fuses and changed them just incase. Any help would be much appreciated! thank you!

I was told it was the solenoid so i bought a new one which came today, fitted it and absolutely nothing happened! I've now completely stripped they alarm out and re-connected everything as i should still no help. I'm now completely lost!

Paddy

06-11-12, 04:05 PM	#1
Sv paddy Guest Posts: n/a	Curvy won't turn over or start. Hey everyone, I'm new to this sort of thing and would really appreciate some help. Right I've had my Sv for about a month now and its been perfect, no issues whatsoever. I went to start my bike yesterday before work and it started first time, like it always has. Then after about five minutes it just cut out! I then of course went to start it again and nothing at all happened! Literally nothing the bike didn't turn over it made no noises. The only thing that worked was the lights, horn and indicators etc. So i left the bike as i had to go to work and came back to it today. I did a bit of research and found other people who had a similar problem. I thought great! Now I have tried everything everyone has suggested. The battery has been fully charged, I've replaced it with a new one, jumped it with the car! Still nothing so i ruled that out. I then tried the killswitch was off and then changed the whole unit to make sure it wasn't faulty of my dads bandit. Nothing! So i tried the clutch killswitch, i cleaned it, i bypassed it. Nothing again -_- ! So the last killswitch being the kickstand i did the same..... you guessed nothing! So i had a look round took it to pieces to look for a loose wire and cleaned everything i could find. That didn't help. I've managed to get it to turn over now but only by jumping the starter solenoid with a screwdriver, so i know its not mechanical. That all works as it should. I am now completely out of ideas and really need help because this is driving me crazy !!! The only thing i can think of is maybe my alarm/ immobiliser is stuck on and stopping it from starting but i don't see how this would happen? Its a Laserline 862 and has never caused me any problems. It turns on and off as it should but of course it has been connected to the wiring loom. And yes it was fitted professionally.Oh i've also checked all the fuses and changed them just incase. Any help would be much appreciated! thank you! I was told it was the solenoid so i bought a new one which came today, fitted it and absolutely nothing happened! I've now completely stripped they alarm out and re-connected everything as i should still no help. I'm now completely lost! Paddy