Serdna

Even with the part number i couldn't find it on line. I ended up going to a local mechanic who ordered the Kwak bolt in for me. Even with the correct bolt it will foul the dogbones if you don't shorten it. Unless i got the wrong bolt. If you are cutting the bolt be sure to put the nut fully on first, then after cutting when you remove the nut and it will clean the end of the thread nicely.

If you are messing around down there for the first time make sure you do it back up with a torque wrench and some medium locktite. There was a thread on here a few months back where a bolt was overtightened on the linkage and it cracked the frame.