SV650.org - SV650 & Gladius 650 Forum - View Single Post

16-10-15, 12:05 PM

They grind the cam to get rid of the ex/in lobes on cyl 3, remove the plug, fit a 15psi pressure release valve in place of the plug to vent any oil or pressure build up from that cyl and remove the injector from that cyl and put a loop hose filled with water on it so ecu still thinks it's doing its job.

16-10-15, 12:05 PM	#4
Stinka Guest Posts: n/a	Re: 600 to 450, will it catch on here? They grind the cam to get rid of the ex/in lobes on cyl 3, remove the plug, fit a 15psi pressure release valve in place of the plug to vent any oil or pressure build up from that cyl and remove the injector from that cyl and put a loop hose filled with water on it so ecu still thinks it's doing its job.