Quote:
Originally Posted by tojo82
Okay so they do look similar. If I turn the screw in the middle does that move that arm down then? I adjusted the screw so that when I saw the arm move slightly I stopped and then backed off 1/8th of a turn. Are you saying I should continue to turn the screw in a few more turns than I am currently doing? I appreciate your continued help and will experiment tomorrow in daylight and post some pictures. Thank you
|
The screw in the middle should be wound out and not in contact with the clutch push rod whilst you are setting the arm angle.
Once you've got the arm angle set correctly then you wind the adjuster screw in
until it goes solid - the actuator may "settle" slightly as the slack in the mechanism is taken out - and then back off the adjuster screw 1/8th of a turn and do up the lock nut.