SV650.org - SV650 & Gladius 650 Forum - View Single Post

Rano · 22-03-19, 11:00 AM

The search feature seems not to be working on the browser with my phone, so apologies if this has been delt with before.

Both Dipped and High beams lost at same time.
Side lights, indicators and hazards are all working correctly.

I have no feed to either of the fuses, but using a logic probe, if I feed 12v into the fuses individually, My dipped and main beams light up respectively. I believe this rules out, bulbs, connectors, earths, etc.

What I can't find is a drawing for the pointy models that have dipped beam fed as soon as ignition is on.
Need to work out the path from switched live, through to the switch (high beam and Pass) and back to the fuses. It seems that the headlamps circuits do not use relays either.

Does anyone have any links to drawings.

My bike is a 2011 SV650 S (SLO)

Thank you

22-03-19, 11:00 AM	#1
Rano Junior Member Join Date: Mar 2019 Location: Essex Posts: 12	No main or dipped beam. The search feature seems not to be working on the browser with my phone, so apologies if this has been delt with before. Both Dipped and High beams lost at same time. Side lights, indicators and hazards are all working correctly. I have no feed to either of the fuses, but using a logic probe, if I feed 12v into the fuses individually, My dipped and main beams light up respectively. I believe this rules out, bulbs, connectors, earths, etc. What I can't find is a drawing for the pointy models that have dipped beam fed as soon as ignition is on. Need to work out the path from switched live, through to the switch (high beam and Pass) and back to the fuses. It seems that the headlamps circuits do not use relays either. Does anyone have any links to drawings. My bike is a 2011 SV650 S (SLO) Thank you Last edited by Rano; 22-03-19 at 11:02 AM.