Got my SV650's ('99 yellow curvy
) and doing my DAS at the moment, but the SV needs a few little things done before it's MOT. I've tried going through the search but it ain't very good here, throws up too much unrelated stuff
First up, I got crash bungs off a forum member (see pic) - I thought (judging from others' pics) they went on No.2 position but on inspecting, this looks like 1 large bolt that goes through both sides of the frame so I didn't see how it could be this. Could someone indicate where the bungs should go? Do I even have all the required parts (there's 2 big cylinders but only 1 little)...or are these even for a curvy SV? (just checking!
).
Next is the sprocket change - I've got the socket clear to remove the front sprocket but this just turns freely when in neutral. Would putting this in 1st gear be the best way to get it off?
Last, I want to change the gear oil. I was wondering where I drain the oil from? Also, I've read on other posts it takes 2300ml - is that as in 2.3L?! I just got a ****y little half litre of Silkolene which won't go very far if it's 2.3L!
Thanks for any help.