Quote:
|
Originally Posted by embee
You'll need to bleed from both nips on a curvy bike, one on each cylinder of the rear calliper. Do the outer one first (where the hose comes in to the calliper), then the inner one 
I assume you checked the reservoir all the time you were bleeding. If you empty the reservoir you'll need to start all over again I'm afraid  |
What Embee said. Sounds like you have either sucked air from the reservoir or you have not bled both of the nipples on the rear calliper. I always bleed the outer one first, then the inner one, and then the outer one again for good measure.
When doing this, always check the reservoir and never let it get low enough so as to let air in.