SV650.org - SV650 & Gladius 650 Forum - View Single Post

rictus01 · 22-05-06, 08:27 AM

10mm headed bolt on water pump (with copper washer) is the drain for the system (on righthand side in front of the clutch cover), you'll have to remove the right (sitting on the bike) fairing panel to get to the filler cap.

Remember 50/50 antifreeze mix with distilled water.

Cheers Mark.

22-05-06, 08:27 AM	#2
rictus01 Member Mega Poster Join Date: Jul 2003 Location: South London Posts: 9,799	10mm headed bolt on water pump (with copper washer) is the drain for the system (on righthand side in front of the clutch cover), you'll have to remove the right (sitting on the bike) fairing panel to get to the filler cap. Remember 50/50 antifreeze mix with distilled water. Cheers Mark. __________________ Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!